CUBE-16

Advanced Cube-16 Strategies: Expert Guide to 3D Sudoku

Line crossings, belt counting and the last occurrence rule: expert techniques that only exist in 3D sudoku.

You know how to use candidates, you spot singles and pairs, and pointing no longer has secrets for you. Yet some expert grids still resist. At this level, the classic techniques are not enough: you have to use the geometry of the cube itself. This guide presents the advanced 3D sudoku strategies that only exist in Cube-16, followed by an expert solving routine.

Before you start, make sure you are comfortable with candidates and with the classic sudoku techniques adapted to 3D.

The geometry experts use

Four facts about the cube are behind every technique in this guide.

1. The cube has three belts. The 12 lines are grouped in three families of four parallel lines. Each family wraps around the same four faces, like a belt:

  • the vertical belt: Top, Front, Bottom, Back (4 vertical lines);
  • the horizontal belt: Left, Front, Right, Back (4 horizontal lines);
  • the lateral belt: Top, Right, Bottom, Left (4 lateral lines).

2. Each face belongs to exactly two belts, and opposite faces belong to the same two: Front and Back are in the vertical and horizontal belts, Top and Bottom in the vertical and lateral belts, Left and Right in the horizontal and lateral belts.

3. Two lines of the same belt never meet. Two lines of different belts meet in exactly two cells, on opposite faces. For example, a horizontal line and a vertical line cross once on the Front face and once on the Back face. In classic sudoku, a row and a column meet in only one cell.

4. Each number appears exactly 6 times in the cube: once on each face, and once on each of the 12 lines.

1. Line crossing

Take two lines from different belts, for example a horizontal line and a vertical line. They share two cells: one on the Front, one on the Back.

The rule: if, in the first line, a number can only go in those two shared cells, then in the second line, that number must also be in one of those two cells. You can remove it from the other 14 cells of the second line.

Example: in a horizontal line, the number 5 is only possible in the two cells where it crosses a given vertical line. Whichever of the two cells gets the 5, that 5 will be on the vertical line. So 5 cannot appear anywhere else on that vertical line: remove it from its 14 other cells, including the ones on the Top and Bottom faces.

The same reasoning works for every pair of perpendicular lines: horizontal and vertical lines meet on the Front and Back, horizontal and lateral lines on the Left and Right, vertical and lateral lines on the Top and Bottom.

2. Belt counting

This is the most powerful technique in this guide, and it has no equivalent in flat sudoku.

Look at one belt: four faces and four parallel lines. A given number appears once on each of the four faces, and once on each of the four lines. Every cell of these faces is on exactly one line of the belt. So the four occurrences of the number on the belt's faces use the four lines, one each.

The rule: if a number is already placed on three faces of a belt, on three different lines of that belt, then on the fourth face it must be on the remaining line. Restrict it to the 4 cells of that line on the fourth face.

Example: in the vertical belt, the number 7 is already placed on the Top face (on vertical line 2), on the Front face (line 4) and on the Bottom face (line 1). On the Back face, the 7 must therefore be on vertical line 3. Of the 16 cells of the Back face, only 4 remain possible.

This deduction is invisible if you look only at one face or one line. You have to look at the whole belt.

3. The last occurrence rule

Belt counting leads to a simple and very effective rule.

The rule: if a number is already placed on five faces, its position on the sixth face is fully determined. The sixth face belongs to two belts. In each belt, the three other faces already have the number, so belt counting forces one line per belt. On the sixth face, those two lines cross at exactly one cell: that is where the number goes.

In practice: regularly count how many times each number has been placed. Any number placed five times gives you a free placement. Even with four placements, belt counting usually narrows the last two positions down to a few cells.

4. Triples and quads

With 16 cells per group, larger subsets appear often on expert grids, especially on lines.

  • Naked triple or quad: 3 (or 4) cells of the same group whose candidates, taken together, are limited to 3 (or 4) numbers. Those numbers can be removed from the rest of the group.
  • Hidden triple or quad: 3 (or 4) numbers that, in a group, can only go in the same 3 (or 4) cells. All other candidates can be removed from those cells.

Tip: naked and hidden subsets are two sides of the same coin. In a group with 7 empty cells, a naked quad means the other 3 cells form a hidden triple. Look for whichever is smaller.

5. Candidate chains

When everything else fails, use cells with exactly two candidates. Such a cell is like a switch: it is either one number or the other.

The method: pick a two-candidate cell and follow both possibilities. "If this cell is 3, then this other cell must be 9, then..." and "If it is 11, then...". If both branches lead to the same conclusion (the same number in the same cell, or the same candidate eliminated), that conclusion is certain, whatever the true value of the first cell.

Keep chains short, and follow the lines around the cube carefully: a link that jumps to the opposite face is easy to miss. Chains are a last resort; most expert grids can be solved with the techniques above.

Expert solving routine

  1. Clean up your candidates after every placement: face plus two lines, all the way around the cube.
  2. Count each number. Any number placed five times: apply the last occurrence rule.
  3. Count by belt for numbers placed on three faces of the same belt.
  4. Pointing and claiming between faces and lines.
  5. Line crossings for numbers limited to two cells in a line.
  6. Pairs, triples and quads, first in the lines, then in the faces.
  7. Chains, only if you are still stuck.

Expert mistakes to avoid

  • Losing a line on the Back face. In the 2D cross, lines can look broken or reversed when they reach the Back face, even though they are continuous on the cube. When in doubt, turn on initiation mode to see the connections.
  • Applying belt counting to the wrong belt. Check that the three faces you are counting really belong to the same belt, and that the three occurrences are on three different lines of that belt.
  • Forgetting the second crossing. Two perpendicular lines meet twice, not once. A deduction that ignores the cell on the opposite face is wrong.

3D-only techniques at a glance

Technique When to use it What it gives you
Line crossingA number is limited to the 2 cells where a line crosses a perpendicular lineRemove the number from the other 14 cells of the perpendicular line
Belt countingA number is on 3 faces of a belt, on 3 different linesOn the 4th face, the number is limited to 4 cells
Last occurrenceA number is placed on 5 facesThe exact cell on the 6th face

Frequently asked questions

Are there techniques in 3D sudoku that do not exist in classic sudoku?

Yes. Line crossing, belt counting and the last occurrence rule all come from the geometry of the cube: lines that wrap around it and meet twice, and belts of four faces.

How many times does each number appear in Cube-16?

Six times: once on each face. Each number also appears once on each of the 12 lines.

Which technique should I learn first?

The last occurrence rule. It is the easiest to apply: just count how many times each number has been placed.

Related articles: